What aspects should graphite products be maintained in

The main uses of graphite are widespread, including insulation bricks, pliers pots, continuous forging powder, casting cores, molds, cleaning agents, and corrosion-resistant materials. Because graphite products have many high-quality properties, they are widely used in industries such as metallurgy, mechanical equipment, electrical equipment, chemical plants, textiles, and national defense and security.

When maintaining graphite products, it is necessary to ensure the following aspects:

1. Prevent strong erosion flames from directly spraying graphite products on the side and bottom of the engine;

During the entire application process, the turning point of graphite products should be adjusted once a week to increase their service life;

3. Applying appropriate combustion aids and preservatives will reduce the service life of graphite products;

4. A moderate distance should be maintained between graphite products and the furnace wall, and graphite products should be placed in the center of the furnace;

5. When removing furnace slag and sticking coke from the graphite product table, gently tap to prevent damage to the graphite product;

6. During transportation, handle with care and avoid dropping or shaking;

7. Graphite products must be strictly prohibited from moisture, and must be stored in dry areas or on wooden shelves;

8. The specification and model number of graphite products refer to the volume of copper;

9. Before application, it must be hot baked next to the drying equipment or furnace, and the temperature should slowly rise to 500 ℃;